Uncategorized

How Does Building Implosion Works? 

»Posted by on Dec 14, 2018 in Uncategorized | 0 comments

There are various methods applied when it comes to demolishing a building. One of these methods is implosion. Unlike the traditional method like crane and wrecking ball, implosion can demolish a 20-story skyscraper. This is the preferred method especially for demolishing large structures. It’s not rocket science, but it surely is challenging. If you want to know more about implosion, contact demolition company Chicago. But for regular readers like you, continue reading this article for the basic information about implosion.  

 

The Process of Implosion 

We would like to explain this as simple as possible. So here we go. The method will become a success if you remove the support structure of the building. The support section should fall off below its point. Once the heavy part of that structure explodes, it will fall off to the lower part and then cause a damage to the building. In this method, it’s the gravity that will do the work and the explosives are the trigger factor.  

The demolition crew will put the explosives on different areas of the building. The most important key is to plan where to place the explosives and then execute the plan correctly. The damage done by the explosives will be enough to collapse the building. After the implosion, the crew will then cleanup the pile of rubble.  

Examining the Architectural Blueprints  

The first step of building implosion is examining the blueprint of the building. This way, the professionals will know where the structural support of the building is. The blaster crew will then tour the area to take notes about the support structure of each floor. Once the data are gathered, the plan of execution is then made. They will make decisions like what kind of explosives to use, where to put them and how to time them. The challenge is then what direction would the building fall? Ideally, it should fall on a safe and vacant area. The building could be topped over to the north or straight down into its own.  

Dynamites and Detonators 

You now have an idea about the basic thing about building implosion. Now, how do blaster crews decide what kind of explosives to use for the building? If the building has concrete columns, blaster crews will use the traditional dynamite. Dynamite is a mixture of chemicals and once ignited, it burns quickly. A large volume of gas is produced, which then expands and applies outward pressure on the columns. This will then shatter the concrete into chunk, then the building will collapse.  

If the columns are made of steel, a specialized explosive is going to be used. Blaster crews usually use RDX or an explosive made of clyclotrimethylenetrinitramine. The compounds of this explosive expand at a high rate speed of 27,000 feet per second. The high velocity slices through the steel column and splits it in half. Once it’s done, the blaster crews might add dynamites to push the column over a certain direction. Using dynamite and RDX will need a sever shock, which  is achieved by using a blasting cap.  

read more

How to build an all Natural Pool 

»Posted by on Dec 14, 2018 in Uncategorized | 0 comments

Going to the beach or a public swimming pool is fun and great, but you can’t help thinking of all the bad things that might latch on to you. Having your own pool is great but having an all natural pool in the yard is awesome. An all natural pool or pond doesn’t have chemicals to sterilize the water instead it uses biological filter and plant roots to achieve clarity and purified water. So if you are interested, here are some tips on how to build an all natural pool.   

Natural Pool

CLEAN THE AREA 

You should make sure that the area where the pool will be, is cleaned. If there are structures that needs to be removed or demolished that should be taken care of first. You can check out the demolition company Chicago has to offer if you live in the area to get that out of the way.   

DESIGN 

Simplicity is the best. When it comes to designing your all natural pool keep your designs simple. A more complex design could be great but it will add to the cost and time into making the pool.   

PERMITS 

Do not forget the permit. This is very important as to be sure that you aren’t breaking any law. Go over this with the city or the homeowner’s association because some will not allow pool in the area. You also have to consider that some pools are taxed and if you don’t register your pool  you might face some problems like tax evasion.  

HIRE  

You can hire the muscles you need to do the next step into making an all natural pool. This will actually save you the time and effort and keep you out of danger if you do not know what you’re doing.  

After you have someone demolish the structure in the area, now it’s time to excavate the area. You don’t have to go too deep if you don’t want to add a lot of reinforcement. 1.8 m or less is good enough for a shallow pool. Flat bottom and square pools are the best as it is easier to level and cost less to make.    

DRAINAGE  

You should have a good drainage planned out. A poor drainage can be a factor for the failure of your natural pool. You got to make sure that the ground waters don’t go into your pool. Ensure that you have a channel for drainage.   

WATER TREATMENT  

Of course it is an all natural pool and the plants help in filtering the water so it stays clean. However, if you want to add something like maybe warm your pool. It is best if you consult the professional this way you won’t be damaging the pool you just had made.   

ENJOY!   

Now you get to enjoy your low maintenance all natural pool. You don’t have to worry skin disease because it is said that you can basically drink the water from the pool because of how clean it is. I suggest that if you do want to drink it, you get it tested just to be on the safe side.  

read more